Thursday, April 22, 2021

BASIC ELECTRONICS COURSE FOR BEGINNERS

Course code: BEC021

Duration: 1 months (4 weeks)

This is beginners course in basic electronics, the course is composed of 15 lessons covering all common electronics components (both passive and active) found in consumer electronics equipment like LCD television and Monitors, CRT television and Monitors, DVDs, Hi-fi systems, Power amplifiers, Switch mode power supplies (S.M.P.S) etc.

In this course you will learn how to identify various components using actual picture, symbol used to represent them on the circuit board, purposes it serves on the circuit, common failure modes and how to test if it is good or bad.

The course will be done by correspondence via email, in total there are 8 assignments, if you decide to do two assignment per week means you will take only 4 weeks (1 months) to complete the course. All assignments will be in MS Word format.

You will read the course material and complete your assignment then return it via email to your facilitator/trainer. The facilitator will then review your assignment and give you feedback on your work.

You can progress at any pace, fast or slow. Your assignment will then be returned to you via email with your next assignment.

Upon completion of this course you will have a solid foundation in electronics to get you started in this exciting career in electronic repair like LCD-LED television repair, microwave repair, home theater repairs, woofer repair, decoders, amplifiers among others.

 

Topic covered

Lesson 1: Introduction to basic electronics

Lesson 2: Introduction to basic tools required in electronics repairs.

Lesson 3: Fuses: -identification, purpose, common failure mode & testing if good or bad.

Lesson 4: Metal Oxide Varistor (M.O.V): - identification, purpose, common failure mode & testing if good or bad.

Lesson 5: Thermistors: - (PTC and NTC) - identification, purpose, common failure mode & testing if good or bad.

Lesson 6: Inductors: - identification, purpose, common failure mode & testing if good or bad.

Lesson 7: Relays: -identification, purpose, basic relay circuit, relay used in power supply, common failure mode & testing if good or bad.

Lesson 8: Capacitors: -identification, types, uses in circuit, understanding capacitor body markings, encoding ceramic capacitors body marking, how to discharge big capacitors, voltage rating of capacitors, common failure mode & testing if good or bad.

Lesson 9: Resistors: - identification, uses, fixed resistors, variable resistors (linear pot and log pot), resistor color code, resistor in series, connecting speakers in series/parallel, application of P.O.T in volume control, resistors in parallel circuit, common failure mode & testing if good or bad

Lesson 10: Diodes: - identification, various types of common diodes, power diodes, damper diodes, fast recovery diodes, signal diodes, Zener diodes, using zener diode as a voltage regulator, using zener diode for protection, light emitting diode(LEDs), common failure mode & testing if good or bad for each type.

Lesson 11: Transistors: - identification, uses in circuits, common failure mode & testing if good or bad

Lesson 12: Integrated circuit (I.C): - identification, pin arrangement, Tips on how to know if it is good or bad.

Lesson 13: Crystals and Resonators: - identification, types (Crystal oscillator & ceramic resonators) uses, testing if good or bad

Lesson 14: Voltage Regulators: - identification, types (positive and negative series), uses, testing if good or bad

Lesson 15: Introduction to switch mode power supply (s.m.p.s)


The course is going introductory price of  $19.95 USA dollars including the study materials

Certificate issued upon successfully completion of the course, see the sample below.

Feedback from students who have completed the course here

Begin your journey today! ongoing classes here!


31 comments:

  1. Hello Hum Tech Electronics. I'm aware of these components, and still I'm willing to do this course. Even though $25.00, great to see this happen. Tell me something Hum Tech Electronics, Will I recieve, or are there any Certicates to be issued, as we look for work, as a reference of our education? Can you please specify, and get back to me A.S.A.P. I appreciate this thought/offer. or send me a txt meassge, George: 647-987-0128 Cheers!

    Truely Yours,
    George Grudenic Jr

    ReplyDelete
    Replies
    1. Hi George,
      Thanks for your feedback, Yes certificate will be issued upon successful completion of the course.
      Sorry your phone number has no country code so I can't send an sms.
      Regards Humtech electronics

      Delete
  2. Will participate as from end of month. Just to see if the content will be challenging.

    ReplyDelete
    Replies
    1. Very welcome my friend Takisi, I know you are well able. See you in class soon.

      Regards Humphrey

      Delete
  3. Hi Humphrey I am Isaac I have being waiting for this, you know I always ask for online learning because I'm in lesotho it is not easy to take a flight to Kenya thanks covid things happen, clarify something here with this 25 dollars is for basic course only then after completion, we proceed to next level. I love electronic repair with all my heart.

    ReplyDelete
  4. Thank you Isaac for your feedback and glad to hear from Lesotho.

    Yes this is basic electronics course for now.

    Other advanced courses like LCD-LED television repair, HomeTheaters repair, microwave oven repair etc will be brought on board down the road.

    Regards Humphrey

    ReplyDelete
    Replies
    1. When do we start, after paying for the book things have started

      Delete
  5. Kudos Kimathi,this is what everyone requires affordable online classes.

    ReplyDelete
    Replies
    1. Thank you for your feedback, we appreciate.

      Regards Humphrey

      Delete
  6. Hello Humphrey Mndaka, Is there a text book, or workbook that we recieve with this training purpose? PLease get back to me as soon as possible. Thank you.

    Sincerely yours,
    George Grudenic Jr.

    ReplyDelete
    Replies
    1. Yes George, a booklet in form of ebook instant download.

      Regards Humphrey

      Delete
  7. Wonderful thoughts. I have gone through basic and crt books. Will you help me have a certificate?

    ReplyDelete
  8. Contact me via email for the same.

    Regards Humphrey

    ReplyDelete
  9. This is what i like about you , yes i have been doing this job for years now but also willing to participate on this , thank you brother I've been following You since 2014 . you are geat

    ReplyDelete
    Replies
    1. Thank you Richard for your feedback and most welcome to hum-tech electronics school.

      Regards Humphrey

      Delete
  10. Thank you sir for impacting your knowledge on us.When are you going to hold online training on LCD-LED television and microwave course.Regards Promise

    ReplyDelete
    Replies
    1. Other advanced courses like LCD-LED television repair, HomeTheaters repair, microwave oven repair etc will be brought on board down the road.

      Delete
    2. I can't wait to participate in this advanced online courses from you

      Delete
  11. when is the online course starting

    ReplyDelete
    Replies
    1. Classes ongoing...click on the course cover to enroll.

      Regards Humphrey

      Delete
  12. My question is on payment method: How do I pay. Is it going to be $25.00 per component, say &25 for capacitor, $25 for resistor,$25 for diode and so on.

    Thank You

    Thomas Wafisause
    Papua New Guinea

    ReplyDelete
    Replies
    1. Oh no Thomas, one payment of $25 USA dollars for the full course which is composed of 8 assignments,15 lessons.
      Basically full package.

      Regards Humphrey

      Delete
  13. what are the tools that we need for this class?

    thank you
    oliver

    ReplyDelete
    Replies
    1. Will be guided by your facilitator once you register.

      Regards Humphrey

      Delete
  14. Sounds good teacher. I want to enroll. Kindly send me the payment details. I bought LCD Television repair and CRT Repair book.

    ReplyDelete
    Replies
    1. Contact me on my whatup number

      +254 733475040

      For details.

      Regards Humphrey

      Delete
  15. Can I pay through Western Union like I did for the two books? I need ESR meter as well. Send quotation.
    Regards
    Mark

    ReplyDelete
    Replies
    1. For details send me whatup message to.

      +254 733475040

      Regards Humphrey

      Delete
  16. Hello Humphrey,
    I am Abraham from Ethiopia. I want to attend your online class. But, in Ethiopia, it is very difficult to pay money to foreign country specially in in terms of US dollar. Please help me if there are other ways to attend your class.

    Thanks!!!

    ReplyDelete
    Replies
    1. Thanks for your interest in joining my online classes.

      Can you pay by western union? Let me know i send you my details.

      My WhatsApp number is 0733 475 040.

      Regards Humphrey

      Delete

BASIC ELECTRONICS COURSE FOR BEGINNERS

Course code: BEC021 Duration: 1 months (4 weeks) This is beginners course in basic electronics, the course is composed of 15 lessons cov...